EasyStand Evolv Shadow

The NEW Shadow Tray

The Adjustable Shadow Tray is exclusive to EasyStand products and provides constant anterior support by shadowing an individual throughout the sit to stand transition. The shadow tray easily flips up with the lock and release system providing an open base when transferring. The tray includes a chest pad, but a large, contoured chest pad is also available. This option can be adjusted in back to tray depth from 4”-20” and seat to tray height from 7”-12″. The new Adjustable Shadow Tray is also retro-fittable and available for the Evolv Medium, Large and XT. This option provides a solution to changing needs for an individual and offers better support with height and depth adjustment, making it a perfect choice for home or multi-user facilities. Not available with mobile.

Adjusting the Evolv

A comprehensive video covering the adjustment of the EasyStand Evolv standing frame. Please note the shadow tray design has changed since this video was shot.

Configuration

Choose what you need

We have split the list of easystand evolv standing frames options to the specific models they relate to, this makes it easier to visualize what is required, the spec form has also been shortened to the relevant options for each frame configuration. These can be found in the download section at the bottom of each page.

If you are not sure on any aspect please contact us we will be more than pleased to help.

Models & Sizes Available

EasyStand Evolv Shadow Medium

Column Front

EasyStand Evolv Shadow Large

Column Front

EasyStand Evolv Shadow XT

Column Front

Operation

Hydraulic Action

The hydraulic action comes as standard either right or left handed, with a straight pump handle and a selection of options re the handle grips. The image shows PNG50328 Adjustable Removable Actuator Handle (cost option) with the standard straight grip.

Options

The Adjustable and Removable Actuator Handle for the Evolv and Glider allows the user to adjust the angle of the pump handle. This adjustment provides additional leverage for smaller users or those with limited dexterity or strength and may enable independent change of position. The actuator handle can also be removed to fit through narrow doorways or in a classroom setting to prevent inadvertent position changes. Not available with Pow’r Up Lift. Hydraulic actuator required.

PNG50070 T-Style Handle Extension

PNG50044 Quad Grip Handle Extension

Pow'r Up Lift

PHG50010 The pow’r up lift raises the user to a standing position with the touch of a button. It provides an alternate lifting mechanism to the manual hydraulic actuator for those without adequate strength or dexterity. The comfortable sit to stand transition and the ability to stop in partial standing and acclimate to position changes remains unchanged when adding the pow’r up lift. Included with the lift is a rechargeable battery, push-button pendant, and an emergency release in case the battery loses power in the standing position.

Tray Options

Shadow Tray (Std)

Shadow Tray Pivot Side

PNG50515 – Black Moulded Adjustable Shadow Tray, see video above

Shadow Tray Pivot Side

PNG50515 – Black Moulded Adjustable Shadow Tray, see video above

Clear Tray Option

Shadow Tray Pivot Side

Clear Tray Option

PNG50517 Clear Adjustable Shadow Tray

Large Chest Pad

Clear Tray Option

PNG30000 - Large Chest Pad Fixed

PNG50331 - Large Height Adj Chest Pad.

Attaches to tray or no-tray bracket to provide anterior support. Replaces standard chest pad. Not available with elbow pad.

Padded Cover

Large Chest Pad

Padded Cover

PNG30295 - A removable padded tray cover with drawstring that attaches to the black moulded, clear, angle adjustable, or shadow tray. Not available for the narrow clear tray.

Hand Grips

Large Chest Pad

Padded Cover

PNG50042 - Provides additional arm and hand support and alignment. Easily movable for precise arm positioning. Attaches with suction cups. Clear tray required.

KNEE PAD's

Independent Knee Pads (Std)

PNG50384-1 - Width range from center to center is 9”-13.5” (24-34cm). Depth range from front of seat is 1”-7.5” (3-19cm). Height range is +5” to -5.25” (+13 to -13cm) from seat pivot.

Independent Roho Knee Pads

Independent Knee Pads (Std)

PNG50385-1 - Roho® Dry Floatation® technology. Width range from center to center is 9”-13.5” (24-34cm). Depth range from front of seat is 1”-7.5” (3-19cm). Height range is +5” to -5.5” (+13 to -13cm) from seat pivot.

Foot Plates & Straps

Multi-Adjustable Foot Plates (Std)

PNG50015-1 - Adjusts independently in height from 1”-5” (2.5-13cm) off floor, plantar/dorsi +/-20°, and +15° toe out adjustment. Recommended for users over 5’10”.

Foot Straps

Multi-Adjustable Foot Plates (Std)

PNG30030 - 15"

PNG50505 - 21"

Length over the top of the foot pair

Velcro® and D-ring adjustment hold feet in alignment with two attachment slots for proper foot positioning. Straps fit foot height 4”-6.5” (10-17cm).

Secure Foot Straps

Multi-Adjustable Foot Plates (Std)

Secure Foot Straps

PNG30031 - 15″

PNG50506 - 21"

Length over the top of the foot pair

Velcro® and D-ring adjustment hold feet in alignment with two attachment slots for proper foot positioning. Straps measured in length over top of foot, with approximately 1.5″ (4cm) of Velcro® overlap.

Seat Options & Positioning Aids

Transfer Seat

PNG30270 - Provides larger surface for lateral transfers. Size is 23”W at widest area x 21.5”L (58x54cm.) May replace the need for a transfer board.

Roho Seat

Transfer Seat

PNG30023 - Maximizes pressure relief using the benefits of Roho® Dry Flotation® technology. Insert is 12”x12” (30x30cm). Replaces standard seat.

Rotating Seat

Transfer Seat

Medium Hip Guide

PNG50318 - Rotating disk is embedded in the seat to reduce shear while swinging the user’s legs into place. It rotates 90° to the left or right and locks in place.

Medium Hip Guide

XL Hip Guide No Offset

Medium Hip Guide

PNG50161 - Supports the hips in symmetrical alignment from sitting to standing. When used on a Medium the width range is 9”-15” (23-38cm). When used on a Large the width range is 10”-15” (25-38cm). Pad size is 4”x6” (10x16cm).

Large Hip Guide

XL Hip Guide No Offset

PNG50198 - Supports the hips in symmetrical alignment from sitting to standing. When used on a Medium the width range is 11”-17” (28-43cm). When used on an Large the width range is 12”-17” (30-43cm). Pad size is 4”x6” (10x16cm). Limited adjustment with Shadow Tray.

XL Hip Guide No Offset

PNG50518 - Supports the hips in symmetrical alignment from sitting to standing. No offset with a width range of 17”-23” (43-58cm). Pad size is 4”x6” (10x16cm). Limited adjustment with shadow tray

Velcro Positioning Belt

PNG30029 - Velcro Positioning Belt 26-55"

PNG30306 - Velcro Positioning Belt

38-67"

Lapbelt Aircraft Latch

Velcro Positioning Belt

PNG30028 - Positioning Belt with Airline Style Buckle 2” (5cm) wide positioning belt provides hip stability with the security of an airline style buckle. Fits hip circumference of 26”-55” (66-140cm).

BackRest Options & Positioning Aids

19" Backrest

Removable Backrest

19" Backrest

PNG50068 Contoured Back 19”H (image shown)

PNG50174 Removable Contoured Back 19”H (see image far right)

PNG50067 Flat Back 19”H (Flat Pad) (Std)

PNG50173 Removable Flat Back 19”H (Flat Pad) (see image far right)

15" Backrest

Removable Backrest

19" Backrest

PNG50062 Contoured Back 15”H (image shown)

PNG50172 Removable Contoured Back 15"H (see image right)

PNG50066 Flat Back 15”H (Flat Pad) PNG50171 Removable Flat Back 15”H (Flat Pad) (see image right)

Removable Backrest

Accessory Mounting Bracket

Removable back detaches with two knobs and provides rear access for patient lift transfers See to left for part numbers

Accessory Mounting Bracket

PNG50034 - Required for attaching the chest vest, lateral supports, high mount chest vest bracket, head supports and push handles.

Lateral Supports

Accessory Mounting Bracket

Lateral Supports

PNG50224 - Lat Support 8-16.5" Curved Pad

PNG50176 - Lat Support 11-19.5" Curved Pad

PNG50535 - Lat Support 8-16.5 Flat Pad

PNG50536 - Lat Support 11-19.5 Flat Pad

requires back and accessory mounting bracket

Chest Strap

Accessory Mounting Bracket

Lateral Supports

PNG50192 - Chest Strap 30-46"

PNG50193 - Chest Strap 34-54"

PNG50504 - Chest Strap 46-66"

High Mount Chest Vest Bracket

PNG11212 - Moves mounting points for chest vest higher to secure shoulders in position. Chest vest not included. Accessories mounting bracket required.

Chest Vest

High Mount Chest Vest Bracket

Contact us for more information of chest vests/harnesses. Back required and accessory mounting bracket plus probably a high mount chest vest bracket.

Head Support Long

High Mount Chest Vest Bracket

Head Support Short

PNG50037 Height range from seat with a 15″ back is 23″-32″ (58-81cm) and with a 19″ tall back it is 25″-34″ (64-86cm). Accessories mounting bracket required.

Head Support Short

PNG50240 - Height range from seat with a 15″ back is 21″-30″ (53-76cm) and with a 19″ tall back it is 23″-32″ (58-81cm). Accessories mounting bracket required.

Push Handles

Head Support Short

Push Handles

Customers have questions, you have answers. Display the most frequently asked questions, so everybody benefits. Accessories mounting bracket required.

Ease of movement Options

Front Swivel Casters Locking (Std)

PNG50314 - Casters allow for easier steering and movement of stander. Replaces front wheels. Extends footprint to 28”x36” (71x91cm).

Easy-Adjust Seat Depth

Front Swivel Casters Locking (Std)

PNG50499 - see the video above

NOT available on the XT.

Back Angle Adjustment Wheel

Front Swivel Casters Locking (Std)

Back Angle Adjustment Wheel

P600002 - Provides quick adjustment of the back angle for multi-user environments. Replaces standard 5 point knob.